Hammer Crusher
Only the latest technology sizing equipment is used on SBM's hammer crusher. SBM is an extensive range of hammer crusher and Rammer rock crushers(varying in size) is available for customer.hammer crusher is widely used in mining, cement, coal, metallurgic, construction material, road building, and Petroleum & Chemical industries. It is used for grinding the medium-hard materials. The material will be grinded by the striking between high-speed hammer and material. It possesses qualities of simple structure, large reduction ratio, and high-efficiency. Both Dry and Wet Process are available.
Hammer Crusher Operating principle:
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.Hammer Crusher Specification:
| Model | Input size |
Output size |
Capacity(t/h) |
Power(Kw) |
Weight(t) |
PC 400×300 |
＜100 |
＜15 |
5-10 |
11 |
0.8 |
PC 600×400 |
＜220 |
＜15 |
10-25 |
22 |
1.5 |
PC 800×600 |
＜350 |
＜15 |
20-50 |
55 |
4.7 |
PC 800×1000 |
＜400 |
＜15 |
20-75 |
110 |
7.9 |
Note: This specification is just for reference, any changes are subject to the products.
SBM’s goal is to establish with its clients a highly flexible, mutually beneficial relationship, committed to ethical and sound business practice. This will ensure that both clients and SBM meet their goals.